| Interval | City main (L/min) |
|---|---|
| 00:00 | 87 |
| 00:30 | 85 |
| 01:00 | 90 |
| 01:30 | 89 |
| 02:00 | 89 |
| 02:30 | 77 |
| 03:00 | 81 |
| 03:30 | 90 |
| 04:00 | 84 |
| 04:30 | 80 |
| 05:00 | 129 |
| 05:30 | 186 |
| 06:00 | 221 |
| 06:30 | 224 |
| 07:00 | 228 |
| 07:30 | 230 |
| 08:00 | 227 |
| 08:30 | 230 |
| 09:00 | 233 |
| 09:30 | 220 |
| 10:00 | 228 |
| 10:30 | 222 |
| 11:00 | 229 |
| 11:30 | 232 |
| 12:00 | 173 |
| 12:30 | 173 |
| 13:00 | 309 |
| 13:30 | 310 |
| 14:00 | 311 |
| 14:30 | 305 |
| 15:00 | 311 |
| 15:30 | 242 |
| 16:00 | 251 |
| 16:30 | 248 |
| 17:00 | 241 |
| 17:30 | 241 |
| 18:00 | 240 |
| 18:30 | 240 |
| 19:00 | 242 |
| 19:30 | 248 |
| 20:00 | 250 |
| 20:30 | 250 |
| 21:00 | 246 |
| 21:30 | 237 |
| 22:00 | 112 |
| 22:30 | 104 |
| 23:00 | 114 |
| 23:30 | 104 |
Real-time data for your factory.
Quantify Environmental installs permanent, long-range wireless sensors across your factory and centralizes everything into one modern, real-time dashboard. We stay on after the install, finding the opportunities and helping your team run the factory more efficiently.
| Interval | Main incomer (kW) |
|---|---|
| 00:00 | 146 |
| 00:30 | 152 |
| 01:00 | 157 |
| 01:30 | 152 |
| 02:00 | 148 |
| 02:30 | 154 |
| 03:00 | 158 |
| 03:30 | 149 |
| 04:00 | 151 |
| 04:30 | 157 |
| 05:00 | 146 |
| 05:30 | 150 |
| 06:00 | 177 |
| 06:30 | 212 |
| 07:00 | 246 |
| 07:30 | 246 |
| 08:00 | 251 |
| 08:30 | 250 |
| 09:00 | 251 |
| 09:30 | 254 |
| 10:00 | 252 |
| 10:30 | 254 |
| 11:00 | 242 |
| 11:30 | 242 |
| 12:00 | 216 |
| 12:30 | 220 |
| 13:00 | 259 |
| 13:30 | 274 |
| 14:00 | 312 |
| 14:30 | 268 |
| 15:00 | 219 |
| 15:30 | 224 |
| 16:00 | 227 |
| 16:30 | 220 |
| 17:00 | 216 |
| 17:30 | 218 |
| 18:00 | 224 |
| 18:30 | 220 |
| 19:00 | 218 |
| 19:30 | 227 |
| 20:00 | 220 |
| 20:30 | 217 |
| 21:00 | 218 |
| 21:30 | 225 |
| 22:00 | 218 |
| 22:30 | 169 |
| 23:00 | 174 |
| 23:30 | 164 |
Trusted by leading organizations across Canada.
[TOM-REVIEW] Logo permissions are confirmed client by client before launch, and four of the twenty carry a caveat recorded in src/data/logos.js: Oberland's permission is oral and needs to be captured in writing, Miracle Valley's mark is our recolour of their white-only file, City of Guelph is a s.9 official mark whose slogan may not be cropped, and Biolab and Eden Valley are below our resolution bar pending a better file. Stellantis stays out: their published site terms forbid this use. The band renders ONLY roster entries with a cleared asset file, so no empty slot can ship.
Your whole facility, one screen.
Every meter and submeter you have reads minute by minute into one login: water, electricity, natural gas, compressed air, temperature, vibration and level. That is an Energy Management Information System (EMIS), and it tells you the moment something drifts off its baseline instead of at the end of the month.
One unified dashboard.
Our platform is hardware agnostic. Your existing meters, PLCs, SCADA historians, production databases and APIs feed the same centralized dashboard our sensors do, so all of your operational data lives in one place.
| Source | Method |
|---|---|
| API | REST API |
| IoT devices | LoRaWAN |
| Wireless sensors | 900 MHz |
| Other systems | Modbus · existing PLC tag |
| Meters | pulse |
| Legacy equipment | 4-20 mA |
| Source | Method |
|---|---|
| API | REST API |
| IoT devices | LoRaWAN |
| Wireless sensors | 900 MHz |
| Other systems | Modbus · existing PLC tag |
| Meters | pulse |
| Legacy equipment | 4-20 mA |
- APIREST API
- IoT devicesLoRaWAN
- Wireless sensors900 MHz
- Other systemsModbus · existing PLC tag
- Meterspulse
- Legacy equipment4-20 mA
Edge computer900 MHz · LOCAL BUFFER
- Water
- Electricity
- Natural gas
- Compressed air
- Vibration
- Boiler
- Six kinds of source, one edge computer on your network, one dashboard.
- Wireless sensors we install, meters and PLCs you already own, and the systems and databases you already run.
- A 4-20 mA signal off a machine older than your network arrives in the same place as everything else.
On your floor
One partner, from the first site walk to the last reading.
We design it, order it, build it and come and install it ourselves. The sensors are wireless, they run for years on a battery, and they go in without stopping your line. When you call afterwards you get the people who were up the ladder.
Wireless sensor · close-up [PHOTO]
Base station · factory behind [PHOTO]
The truck at the silos [PHOTO]
Compressors, chillers, boilers [PHOTO]
Antennas · 900 MHz [PHOTO]
Two ways our system pays for itself.
Production and process visibility
This is the half most people do not expect. We read silo levels, vibration, product temperature and the health of your compressors and cooling towers, which are numbers most factories have never had. It is the fastest growing part of our work, and it is where predictive maintenance starts: you replace a bearing on a Saturday rather than meeting it on a Tuesday.
Utility and overhead reduction
We put permanent meters on water, electricity, natural gas and compressed air, and we price what they read. Utility monitoring by the minute turns the easy wins up quickly, and most of them are schedules, set-points and equipment nobody meant to leave running. They cost nothing to fix.
Nine places your factory is leaking money.
- 01
Water
A 10 LPM leak costs >$15,000 a year.
We submeter every major consumer, usually find the leak in the first week, and the monthly review is what makes sure it gets fixed.
- 02
Electricity
Demand charges are often 30–40% of the bill.
You see the peaks before the utility bills them, and the dashboard shows whether shifting, shaving or rescheduling is the one that pays.
- 03
Natural Gas
Unnoticed waste quietly inflates heating bills 10–20%.
Baseload creep never shows up on a monthly bill. On a 60-second trace you can watch it happen.
- 04
Compressed Air
Leaks silently eat 20–30% of compressor output.
It is the most expensive utility per unit of work in the factory, and the easiest twenty per cent you will ever get back.
- 05
Silo & Material Level
Someone is still climbing the silo to check.
Non-contact radar level, read continuously, with an alert before it runs low. Nobody climbs, and nothing runs out mid-shift.
- 06
Vibration
A bearing changes its signature weeks before it seizes.
You cannot hear the shift and you cannot feel it. In the trend it is unmistakable.
- 07
Predictive Maintenance
Unplanned downtime runs $10,000+/hour at most factories.
It is the same repair either way. Doing it on a Saturday instead of in the middle of a crisis is worth far more than the part.
- 08
Temperature & Humidity
The 6 a.m. round takes 31 minutes, or 0 from your desk.
Temperature, humidity and humidex, watched continuously rather than checked once a quarter.
- 09
Process Monitoring
A hunch is not something you can act on. Data is.
Cycle counts, runtime, firing rate and product temperature: the process numbers a utility bill will never show you.
What can we measure?
We can source or integrate almost any sensor or meter.
- PressureLine, header and vessel pressure, continuously.
- TemperatureProduct, ambient and asset, NIST probes where it matters.
- HumidityRelative humidity in rooms, coolers and dry stores.
- VibrationThree-axis, on motors, pumps, fans and gearboxes.
- LevelSilos, tanks and totes, without the ladder.
- FlowWater and liquid flow on the main and every sub-user.
- pHEffluent, process water and CIP returns.
- Total suspended solidsWhat your wastewater surcharge is actually priced on.
- Air qualityParticulate, carbon dioxide, carbon monoxide and more.
- Water qualityConductivity, dissolved oxygen and ORP alongside pH.
- Energy and powerMains and sub-users, current draw, demand peaks.
- Compressed airFlow and pressure, so leak load stops being a guess.
- Analog signals4-20 mA, 0-10 V, pulse and dry contact.
- Process operationsRuntime, cycles and the numbers a bill never shows.
- Predictive maintenanceCatch the bearing on a Saturday, not on a Tuesday.
- Asset monitoringWhere it is, whether it moved, whether it is open.
Funding
Your project may already be covered.
Utilities and governments pay for a lot of this work. We sit down with your team, learn about the project, connect you with the funding agencies and help put the paperwork together. Here are three programs open to Canadian manufacturers right now.
Enbridge Gas: Industrial Custom Program
Enbridge Gas (Ontario)
AmountManufacturing: $0.30/m³ of annual gas saved for the first 50,000 m³, then $0.20/m³; capped at 75% of incremental project costs to a maximum of $250,000 per project
Custom incentives and engineering support for industrial natural-gas efficiency retrofits (boilers, heat recovery, steam systems, process heating and similar projects) paid per cubic metre of gas saved.
What this covers Updated
Save on Energy: Retrofit Program
IESO (Independent Electricity System Operator), Ontario
AmountUp to 50% of eligible project costs; Custom stream pays $1,800/kW or $0.20/kWh, whichever is higher; Prescriptive industrial EMIS pays $50,000 (facilities up to 400,000 GJ/yr) or $250,000 (above 400,000 GJ/yr); double incentive rates available in electricity-constrained regions (still capped at 50%)
Incentives for electricity-saving upgrades at industrial and commercial facilities (HVAC/chillers, lighting and controls, variable-speed drives, manufacturing equipment and solar PV) via prescriptive (set) and custom (measured-savings) streams. The prescriptive stream also funds installation of an industrial Energy Management Information System (EMIS), i.e. the metering and monitoring layer itself.
What this covers Updated
Ontario Made Manufacturing Investment Tax Credit (and Expanded OMMITC)
Government of Ontario
Amount10% base rate (up to $2M/year); enhanced 15% rate for expenditures May 15, 2025 – Dec 31, 2029 (up to $3M/year), on up to $20M of eligible expenditures per taxation year. The CCPC credit is refundable; the Expanded OMMITC for non-CCPCs is a 15% NON-refundable credit.
A corporate income tax credit on capital investments in Ontario manufacturing, Class 53/43 machinery and equipment used in manufacturing or processing, and Class 1 buildings used for manufacturing or processing. Refundable for CCPCs; the expanded credit for non-CCPCs is non-refundable.
What this covers Updated
TYF · Text Your Factory
Ask your factory. It answers.
Ask your factory a question in plain language and get a clear answer back, quickly. TYF is our AI agent, and it reads the same live data your dashboard does.
Typical questions you can ask
- “What was the water use in my facility last week, day by day?”
- “Is my compressor running well?”
- “Do a water balance.”
What was the water use in my facility last week, day by day?
Weekdays run about 40 m³. Saturday and Sunday still came in at22 and 19 m³ with the factory down. That is baseline flow, not production.
News
What we’ve been up to.
- We ran the Industrial IoT session a second timeFour weeks after the first one, we ran the Industrial IoT webinar again on 29 November 2023, with more time spent on the questions the first session ran out of room for.
- The webinar we ran on Industrial IoT in manufacturingOn 1 November 2023 we ran a free hour on what Industrial IoT and AI actually change on a factory floor, and what they do not. Here is what we covered.
- What we heard at MeatEx in TorontoNotes from the floor: what processors asked about, what surprised them, and the one question that came up at almost every conversation.
What our clients say.
…immediate annual savings of over $150,000…
…unprecedented visibility…
I’ve never seen a system this good.
Start with a walk around your facility.
An hour on your floor with you and your team, a look at your last few months of utility bills, and an honest read on what is worth metering first and whether funding is available.
Book a site visitSee the platform
or call 1-833-QUANTFY (1-833-782-6839)











